Disclaimer: Items on the website are not be used for the purpose of illegal surveillance of unsuspecting subjects. The items are to be used only in compliance with all the local laws and regulations under the threat of penalty.
The GSM Safe 3 detects illegal activation of a mobile phone and renders the microphone in the mobile phone useless by generating white noise when radio-waves are detected.
This product is end of line and no longer available. If you are looking for a product with the same or similar specifications, please see related products at the end of the page or contact us directly at email@example.com
The perfect tool for eliminating modern communication devices as a potential security hazard during confidential conversations, meetings, etc. It is designed as a desktop stand while protecting your conversations in case your (or your partner/s) mobile phone has been modified, changed, or has pre-installed spyware software on it.
GMS Safe Main Features:
- Accurate and sensitive detection of GSM 900/1800, CDMA850, WCDMA2100 (3G, UMTS), and Bluetooth by an intelligent algorithm of the microcontroller
- Built-in diode for indication of the active mode and kind of the detected protocol
- The newest version - turns on automatically when a telephone is put inside and automatically turns off when the handset is taken out!
- LED indicators: CDMA850 - Green / GSM - Red / 3G (UMTS) - Orange / Bluetooth - Blue
- Designed as a wooden desktop stand
- A new more sensitive scheme of detection with preselectors provides a better detection distance
- Long battery life of up to 10-15 days (when used moderately)
- Does not block the mobile network in the area
- Has no adverse effect on health (no electromagnetic waves)
- Compatible with virtually all types of GSM telephones (max width 7 cm, practically any height, and thickness)
GSM SAFE 3 Specifications:
Detected protocols: GSM 900/1800, CDMA 850, WCDMA 2100 (3G, UMTS), and Bluetooth
The frequency range of generated interference, Hz: 300 - 5000 (white noise)
Power source: 3V, 2*AA - batteries included
Dimensions (without antennas): 102*84*74
Current consumption: 1.2 mA / 50 mA (stand-by/active)
2 Working Modes:
- Detect – warns you with the help of the LED when the telephone starts an exchange of information
- Noise – in addition to warning the GSM SAFE 3 will produce audio interference which suppresses the telephone’s microphone
How to use the GSM Safe 3:
- Insert the batteries in the device (you will need to unscrew the battery compartment on the bottom of the device and place the batteries inside)
- Select a working mode
- Put your phone inside it, the device will turn on automatically. The green LED will flash every 2 seconds for confirmation.
- To check if the GSM Safe is working properly, make a call from your mobile phone and put it in the GSM Safe 3. The diode should turn on, and stay that way longer than just blinking green.
- Depending on the detected type of signal - the LED indications will change color.
For more specifics on the installation process, device usage, and bug detection, please carefully study the PDF files below.
>>Download detailed specifications (PDF)<<